The cost of gas and electricity is always on the rise, and it is becoming increasingly important to consider the energy efficiency of your home furnace. While the cost of a new furnace is a shock for most people, it is beneficial in the long run. Here are a few reasons why buying a new furnace can save you money.

Repair Costs

Newer furnaces save money as they require less repairs. As with anything that gets older, your furnace requires more repairs as it ages. Over time, constant repairs add up and become expensive. Especially when many call-outs or after-hours calls are required, often these costs will exceed that of a replacement furnace. If you find that service calls are becoming more frequent, it is likely time to purchase a new furnace.

Energy Efficiency

Newer furnaces save money as they are more energy efficient. Not only do old furnaces require more repairs, the cost of running and maintaining older furnaces is significantly greater. Overall, older furnace models consume more energy than newer models. Now that technology is more advanced, energy efficient and environmentally friendly furnace models exist and they are definitely better options. 

It is worth noting that older furnace models may also be heating your home unevenly. Naturally, older models are not as efficient in operation or functionality. Older furnaces just cannot keep up with household demands. They become strained which leads to bill increases. Newer furnaces are able to produce more heat while using less energy, saving you money on your energy bills.

Environmental Benefits

Though the environmental benefits of newer furnaces are not always top of mind, they are surely significant. Using efficient heating systems has a positive impact on the environment. With energy-efficient furnaces, the use of fossil fuels and power stations is decreased. This results in reduced consumption of natural resources and less pollution. If everyone made the switch to a more energy-efficient furnace, imagine the magnitude of impact this would have on the environment. 

Not only will a new furnace ensure more money remains in your pocket, but it will also provide you with peace of mind and a dependable source of heat for your home.

These are a few reasons why buying a new furnace can save you money. Be sure to schedule your routine furnace maintenance to ensure your system is running as it should. If you need any assistance with your furnace or home heating and cooling equipment, do not hesitate to contact our team at JOB Heating & Air Conditioning.

Your water heater consumes more energy than all household appliances combined, accounting for 17% of the energy use in your home. Not sure when to upgrade? Here are signs it is time to upgrade the water heater in your home. 

The Water Heater Is Old

Though water heaters are certainly built to last, they do not last forever. Generally, water heaters last 20-30 years. However, if your water heater is over 15 years old, it is worth looking into purchasing a new one. Water heaters lose efficiency over time, and newer more efficient systems are always entering the market. If you cannot remember when your water heater was purchased, look for a sticker near the top. This manufacturer sticker will have numbers – the first two usually indicate the year. 

It is important to note that a new water heater is well worth the investment. Your water heater is a significant contributor to your energy bill. While old hot water heaters run continuously, newer models use minimal electricity to provide hot water whenever you need it.

Your Water Is Not Hot Enough

As a rule of thumb, hot water should start to flow within a minute of turning on the tap. If this is not the case and you are stepping into a cold shower, the heating element may be worn out. Even in the cold Saskatchewan winters, your water heater should be performing promptly. If it is not, it is time to have a professional take a closer look.

Your Water Heater Is Making Loud Noises

A noise coming from your water heater is indicative that there is an issue with the mechanical system. In older hot water heaters, rumbling sounds are common. This rumbling sound is the result of sediment build up on the tank floor that accrues and hardens over time. When sediment buildup occurs, your water heater is less efficient, damage-prone, and runs the risk of breaking down completely.

You Notice Rust On The Water Heater Or In Your Water

Signs of rust on the water heater or in the water itself are signs to look out for. It is possible for rust to occur even in newer hot water heaters. Be sure to check the water inlet or pressure relief valve on the water heater unit. These are two places where rust is noticeable and indicate that rust is likely present within the tank as well. 

If the water flowing from your taps is rusty, there is an issue with your water heater system. Be sure to call in a professional before a bigger problem arises such as a leak. 

You Notice Leaks 

As water heater units age, leaks are more common. A leaky water heater is a tell-tale sign that it is time to upgrade. Sometimes, loose fittings or issues with the pressure overflow pipe are the cause of leaks. Usually, however, leaks are caused by metal in the tank expanding after years of heating cycles. Whenever a leak is involved, it is more than likely your water heater requires an upgrade. 

If you notice any of these signs, it may be time to upgrade the water heater in your home. If you are ready for an upgrade, do not hesitate to contact our team at JOB Heating & Air Conditioning. We will help you explore water heater options and answer all your questions.

JOB Heating & Air Conditioning is a Trusted Saskatoon plumbing company. We show up on time, deliver on budget and we leave the work area cleaner than when we arrived! At JOB we take pride in our plumbing services in this city and surrounding area, so nothing means more to us than testimonials from our clients as their preferred plumber in Saskatoon.

Our Saskatchewan winters are around the corner, and it’s time to ensure that your home is ready to combat the chilly Saskatoon days and frosty nights. One of the most crucial steps in winter preparation is getting your furnace in tip-top shape. A well-maintained furnace not only keeps you warm but also saves you money on energy bills. In this blog, we’ll provide you with 10 tips to prepare your furnace for winter.

1. Schedule a Professional Inspection: Start by scheduling a furnace inspection with a JOB Heating & Air Conditioning Inc. qualified HVAC technician. They will check for any potential issues, clean essential components, and ensure that your furnace is running efficiently and safely.
2. Replace or Clean Air Filters: Dirty or clogged air filters can reduce your furnace’s efficiency and worsen indoor air quality. Replace disposable filters or clean reusable ones before the heating season begins, and check them monthly throughout winter.
3. Clean Vents and Ducts: Dust, debris, and even pests can accumulate in your vents and ducts, blocking airflow and reducing efficiency. Consider hiring a professional to clean them, improving air quality and furnace performance.
4. Check for Leaks and Insulate: Inspect your home for drafts and seal any gaps around windows, doors, and vents. Proper insulation reduces heat loss and helps your furnace work less to maintain a comfortable temperature.
5. Test the Thermostat: Ensure that your thermostat is functioning correctly. Replace the batteries if needed and program it to a comfortable and energy-efficient temperature schedule for winter.
6. Lubricate Moving Parts: Regularly lubricate your furnace’s moving parts, such as bearings and motors, to reduce friction and extend their lifespan. Refer to your furnace’s manual for guidance.
7. Check for Gas Leaks: If you have a gas furnace, it’s crucial to check for gas leaks. If you detect a gas odor or suspect a leak, immediately turn off the gas supply and contact a professional.
8. Inspect the Flue and Venting: Check the flue and venting system for any blockages or damage. Proper venting is essential to prevent carbon monoxide from entering your home.
9. Replace Old or Faulty Thermostats: Consider upgrading to a programmable or smart thermostat if your current one is outdated. These devices offer greater control and energy-saving features.
10. Stock Up on Supplies: Lastly, stock up on essential furnace supplies like air filters, spare parts, and a carbon monoxide detector. Having these items on hand can help you stay comfortable and safe throughout the winter.