Trusted Saskatoon Furnace & Duct Cleaners Bridge City Duct Cleaning provides both residential duct cleaning and commercial duct cleaning and furnace maintenance services. Their team is professionally trained, qualified, bonded, and factory furnace and duct cleaning technicians. In their latest article, they discuss how air duct cleaning is done.

HOW AIR DUCT CLEANING IS DONE

You’ve seen the signs that your Air Ducts need cleaning, but now are you wondering how air duct cleaning is done? What do you need to be prepared for?

The Steps To How Air Duct Cleaning is Done

Step 1: Inspect The Air Ducts

A simple, visual inspection of the ducts leading to the return and supply registers is important for two reasons. First, it’s a step that you can take yourself to assess the level of buildup in the ducts beforehand and confirm the difference after they’ve been cleaned.

Second, a professional duct cleaning is an opportunity for Bridge City Duct Cleaning to check the ductwork for leaks or, in the case of flexible ducts, kinks. It is also a good time to repair and replace damaged ductwork.

Step 2: Create Negative Pressure

Bridge City Duct Cleaning uses large, portable or truck-mounted vacuum collection devices to suck dust and debris out of your ductwork. However, before turning on the suction and scrubbing the ducts, the technicians must perform preliminary steps.

First, they hook the vacuum collection device’s large hose to a duct close to the air handler—the heart of your HVAC system. The technician cuts an access hole in the duct, inserts the vacuum hose, and seals where they join as tightly as possible.

(Note that your HVAC system has a supply and a return side—ducts that send treated air into the rooms of the house, and ducts that return air to the air handler. The supply and return sides are separate, and the duct cleaning process is performed on each.)

Next, the technician will seal each register with an adhesive cover. This is an important step because even an extremely powerful vacuum collection device will not work if the registers in each room of the house are uncovered.
Once the technician finishes these steps, they turn on the vacuum unit. This step creates negative pressure, and particles inside the ductwork will be sucked into the collection device as they are brushed or blown loose.

Step 3: Agitate The Dust

Once the system is under negative pressure, the technician uncovers each register and cleans each duct. Technicians use rotating brushes, compressed air tools, and simple vacuum cleaners to ensure dust is dislodged and sucked into the vacuum collection device.

Step 4: Clean The Rest Of The System

It is recommended to clean the other components of the HVAC system as well, including the air handler’s blower motor, evaporator coil, and drain pan.

Cleaning these components, along with cleaning or changing the filter, will improve the air quality in your home as well as extend the life and increase the efficiency of your HVAC system.

A Bridge City Duct Cleaning technician will perform the job thoroughly and carefully, ensuring that your ductwork winds up clean and undamaged. A thorough cleaning should take three to five hours and this is how your air ducts are cleaned.

Call today to book your appointment with Bridge City Duct Cleaning.

Bridge City Duct Cleaning Services Include:

Bridge City Furnace and Duct Cleaning Is A Trusted Saskatoon Furnace and Duct Cleaning Company

Breathe Better Indoor Air Quality are here to service all your Indoor Air Quality needs in Saskatoon.They provide the best furnace and duct cleaning in Saskatoon. In this article they explain when you should get the furnace and ducts cleaned!. Breathe Better Indoor Air Quality Specialists are Trusted Saskatoon Furnace and Duct Cleaners.

When Is It Time To Clean Your Ducts?

Over time, ducts become littered with foreign objects such as dust, mould, dead insects, dust mites, and animal hair. Unfortunately, people often overlook cleaning their ducts, which can lead to problems.

Consequences Of Dirty Ducts

Dirt and dust restrict the heating and cooling capability of ducts, which results in increased run time requiring more fuel and energy, therefore costing you more!
Airflow is restricted, which means the system can’t effectively circulate properly warmed or cooled air throughout your home. Again, this means that more energy will be used.
As your HVAC system needs to operate longer, it increases its wear and tear. This means you’ll need to replace it sooner, which would be a lot more expensive than just getting it cleaned.
All the dirt and dust that is left in the ducts can become a breeding ground for bacteria, mites and other unwanted pests, which can be detrimental to your health and exacerbate allergies.
The dirt and dust spread much quicker around your home with dirty ducts, no matter how much you clean! The contaminants flow from room to room covering anything in their paths, such as beds, tables, phones, and children’s toys.

How To Determine If Your Ducts Need Cleaning

You can attempt a visual inspection of the air ducts to help determine whether they need cleaning. However, you must be able to physically access ALL the areas of your HVAC system in order to do this properly. That is why we recommend you getting the professionals in to inspect the system, as with our high-resolution video inspection cameras, we can have a thorough look to determine whether your ducts need cleaning.

Determine The Type & Amount Of Debris Inside Your Ducts

It is inevitable that at some point ducts will get clogged with various types of debris and pollutants. This can consist of pollen, rodent and insect faeces, dust, dust mites, and lint. All of these MUST be removed to ensure the proper functionality of your ducts.
If you find mould growing inside or outside the surface of the ducts, a thorough moisture issue investigation needs to be quickly carried out to prevent any further complications. It is essential that you do not try to tackle mould in or out of the system yourself, but instead, let the professionals do it on your behalf.

Clean The Duct Yourself Or Not

If dust, debris, pollens or moulds have accumulated to the point where they are clogging air ducts, collecting on dampers, joints and screws, then it is most certainly time to get those ducts PROFESSIONALLY cleaned. If you fail to do so the airflow will get restricted, affecting its efficiency in the long run and potentially causing premature failure of the whole system.

Breathe Better is committed to providing clean and healthy indoor air quality. They always follow best practices in sanitizing equipment between clients, maintaining a comfortable distance between technicians and clients, and offering unique sanitizing options to help you keep safe and healthy.